Eureka Electric Arc Protective Arc Glove
0 Review
SKU 13-4-Heat
Eureka Electric Arc Protective Gloves
It is designed to be protected from electric arc with high cut and heat and flame resistant.
- High quality non-flammable nitrile coating
- ASTM F2675. ATPV <30 Cal/cm2 certified arc flash protection
- Water and oil repellent
- It is resistant to EN 407, 100˚C contact temperature.
EN 388:
Wear:3
Cut off:5
Tearing:4
Puncture:4
eureka glove value most standard
ATPV <30 Cal/cm2 It is designed to be protected from electric arc by being resistant to high cut and heat and flame.
They are specially designed gloves that fall under the 89/686/EEC Personal Protective Equipment class.
It is produced in accordance with EN 407 and EN 388 standards.
It carries the CE mark and complies with CAT II.
The glove is designed for arc flash, flame retardant and cut resistance.
Arc flash has a value of 23 Cal/cm² according to ASTM 2675.
It is resistant to 100˚C contact temperature.
The palm has moderate breathing properties.
Contains small amount of zinc organic Accelerators.
The cuff contains an elastic band and a small amount of polyester-coated raw rubber.
Technical information
It is designed to be protected from electric arc with high cut and heat and flame resistant.
ATPV <30 Cal/cm2 It is designed to be protected from electric arc by being resistant to high cut and heat and flame.
They are specially designed gloves that fall under the 89/686/EEC Personal Protective Equipment class.
It is produced in accordance with EN 407 and EN 388 standards.
It carries the CE mark and complies with CAT II.
The glove is designed for arc flash, flame retardant and cut resistance.
Arc flash has a value of 23 Cal/cm² according to ASTM 2675.
It is resistant to 100˚C contact temperature.
The palm has moderate breathing properties.
Contains small amount of zinc organic Accelerators.
The cuff contains an elastic band and a small amount of polyester-coated raw rubber.
High quality non-flammable nitrile coating
It is water and oil repellent.
Firefighter glove materials:The glove will consist of para-aramid lining, anti-static yarn, glass fiber and elastic fabric.
It will include coating in Chloroprene-Nitrile composite foam.